Brita Water Hardness Test Kit

Description

Use this convenient water hardness test kit to help determine the hardness of your tap water.

Determine Temporary Hardness – In order to set up the correct bypass
Use a BRITA drop test kit.

Check that the test kit is still in date – see side of box (an out of date kit will
give an incorrect reading).
The result will determine the bypass setting required on the filter head
at installation.
1. Place 5ml of mains water into the test tube.
2. Add a single drop of the testing solution and gently shake the test tube
to ensure the liquids are mixed.
3. Continue to add single drops as above until the water in the tube changes
to a bright yellow – this is how hard the water is.
Example : One drop = 1 dH Carbonate Hardness,
10 drops = 10 dH Carbonate Hardness