Complete Recessed Side Spray Rinser Kit

Description

This Complete Side Spray Rinser Kit includes the Recessed Side Spray Rinser, a 3/8 0.5m braided hose, a 350kpa pressure limiting valve and a 14mm 1m drain hose.

The Side Spray Pitcher Rinser is a versatile asset to your bar flow. Its wide drain cover can be used to dump liquids from any position or to store milk jugs for drying.

Made in Australia and built with 100% stainless steel, it is designed to be recessed into any bench top. It features a stainless steel body and a stainless steel disk which can be easily removed for cleaning or replacement. Rinsers facilitate cleaning allowing for quick removal of milk deposits at the same time they lower the temperature of the milk jug so that the next batch of steamed milk can attain quality texture, great taste and consistency.

WHAT’S IN THE BOX

1 x Recessed Side Spray Rinser Barista Progear
1 x 350kpa Pressure Limiting Valve
1 x 3/8 x 3/8 0.5m Braided Hose
1 x 3/8 x 1/2″ Nipple Fitting
1 x 14mm 1m Drain Hose

• Dimensions: 425mm L x 200mm W x 22mm H
• Materials: Stainless steel
• Care Instructions: Simply rinse or wipe down
• Rinser Includes: Stainless steel disk

We strongly suggest having the product in-hand prior to cutting counter tops. Barista Supplies is not liable for mis-calculated or mis-cut bench tops.

Download Side Spray Rinser Spec Sheet

The water and drain tubes connect to the bottom of the rinser. We recommend that the water pressure is 15-30PSI, if water pressure is over 400kpa we suggest a 350kpa pressure limiting valve to be fitted, this is to alleviate the possibility of the valve weeping or leaking and a 350kpa pressure limiting valve will also reduce the possibility of the seal being blown up over the feed holes which will restrict the water flow. We suggest flushing the feed water lines to the rinser before installation especially on new water lines, to prevent any debris getting in to the valve which will cause the valve to leak.

Download Side Spray Rinser Spec Sheet