Complete Side Spray Rinser Kit (400mm x 180mm)

Complete Side Spray Rinser Kit (400mm x 180mm)


Complete Side Spray Rinser Kit (400mm x 180mm)


In stock


or 4 fortnightly payments of $129.75 with Afterpay More info



This Complete Side Spray Rinser Kit includes the side spray rinser 400 x 180, a 3/8 0.5m braided hose, a 350kpa pressure limiting valve and a 14mm 1m drain hose.

The Side Spray Pitcher Rinser is a versatile asset to your bar flow. Its wide drain cover can be used to dump liquids from any position or to store milk jugs for drying.

Made in Australia and built with 100% stainless steel, it is designed to be recessed or placed on top of any bench top. It features a stainless steel body and a stainless steel disk which can be easily removed for cleaning or replacement. Rinsers facilitate cleaning allowing for quick removal of milk deposits at the same time they lower the temperature of the milk jug so that the next batch of steamed milk can attain quality texture, great taste and consistency.

Rinsers are an essential product to have next to a coffee machine in restaurants, cafes, bars, coffee carts and mobile vans as they save time and money and make rinsing shot glasses, pitchers and cups simple and easy. Rinsers also increase work flow by saving time running to the sink after steaming milk. To use, simply press the milk jug down on the disk and water will spray out to clean and cool down the milk jug making it ready for use. Milk Jugs should only be rinsed using cold water to bring the temperature down from a food danger zone, milk jugs need to clean and cooled down with cold water between each use for both sanitary purposes and achieving quality texture to the milk.


1 x Side Spray Rinser (400mm x 180mm) Barista Progear
1 x 350kpa Pressure Limiting Valve
1 x 3/8 x 3/8 0.5m Braided Hose
1 x 3/8 x 1/2″ Nipple Fitting
1 x 14mm 1m Drain Hose

Same Day Dispatch For Orders Placed Before 3pm AEST

Standard Shipping Flat Rate $10 1-4 Business Days
Express Shipping From $12.40 1-3 Business Days
International Calculated at Checkout 2-10 Business Days
Pick Up from Warehouse 11/76 Rushdale St
Knoxfield, Victoria 3180
Same Business Day

Please Note: Regional areas may have slightly longer shipping times.




There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

  • Dimensions: 480mm L x 180mm W x 20mm H
  • Materials: Stainless steel
  • Care Instructions: Simply rinse or wipe down
  • Rinser Includes: Stainless steel disk

Download Side Spray Rinser Spec Sheet

The water and drain tubes connect to the bottom of the rinser. We recommend that the water pressure is 15-30PSI, if water pressure is over 400kpa we suggest a 350kpa pressure limiting valve to be fitted, this is to alleviate the possibility of the valve weeping or leaking and a 350kpa pressure limiting valve will also reduce the possibility of the seal being blown up over the feed holes which will restrict the water flow. We suggest flushing the feed water lines to the rinser before installation especially on new water lines, to prevent any debris getting in to the valve which will cause the valve to leak.

We strongly suggest having the product in-hand prior to cutting counter tops. Barista Supplies is not liable for mis-calculated or mis-cut bench tops.

Download Side Spray Rinser Spec Sheet

You've just added this product to the cart:



*When you spend $50 or more